Riso ComColor Machines Errors Trouble-Shooting!
Suitable for ComColor 3010R/3050R/7050R/9050R/ 3150R/7150R/9150R
ComColor 3050/7050/9050/3150/7150/9150
Error Codes Display and Details
1. S01: Belt platen transfer error
S01-1038 S01-1130 S01-1131 S01-1132
2. S03: Belt platen raising/lowering error
S03-2012-1 S03-2012-2 S03-2012-3 S03-2012-4 S03-2012-5 S03-2012-6 S03-2012-7 S03-2012-8
Type | S01: Belt platen transfer error | |
Display | !!System Error!! Turn the powder SW OFF then ON. If recovery has failed, call service | |
Corrective Action | Turn OFF the printer. (Turn OFF the printer through sub power key.) | |
Point | Description | |
1038 | Transfer belt motor locked error | |
1130 | After the transfer belt motor starts up and the speed stabilizes, the belt HP sensor is not activated in time. | |
1131 | The belt HP sensor remains activated. | |
1132 | The BP Belt HP Sensor does not go ON from the time the machine is powered ON and until the printing starts. | |
Type | S03:Belt platen raising/lowering error | |
Display | !!System Error!! Turn the powder SW OFF then ON. If recovery has failed, call service | |
Corrective Action | Turn OFF the printer. (Turn OFF the printer through sub power key.) | |
Point | Description | |
2012 | 1 | When the BP unit is elevated to the upper limit position (for regular paper), the rear-left of the BP unit is not detected by the Contact detection mechanism. |
2012 | 2 | When the BP unit is elevated to the upper limit position (for regular paper), the rear-right of the BP unit is not detected by the Contact detection mechanism. |
2012 | 3 | When the BP unit is elevated to the upper limit position (for regular paper), the front-left of the BP unit is not detected by the Contact detection mechanism. |
2012 | 4 | When the BP unit is elevated to the upper limit position (for regular paper), the front-right of the BP unit is not detected by the Contact detection mechanism. |
2012 | 5 | When the BP unit is elevated to the upper limit position (for card paper), the rear-left of the BP unit is not detected by the Contact detection mechanism. |
2012 | 6 | When the BP unit is elevated to the upper limit position (for card paper), the rear-right of the BP unit is not detected by the Contact detection mechanism. |
2012 | 7 | When the BP unit is elevated to the upper limit position (for card paper), the front-left of the BP unit is not detected by the Contact detection mechanism. |
2012 | 8 | When
the BP unit is elevated to the upper limit position (for card paper),
the front-right of the BP unit is not detected by the Contact detection
mechanism. |
Tel: +86-592 6896238
Fax:+86-592-6896237
Mob./whatsapp: +86 13860165915
E-mail:info@kreyoly.com
http://www.kreyoly.com
Add: 604-9,No. 22, Guanri Road, Software Part II, Xiamen Torch Development Zone For High Technology Industries,361008,China
Copyright © 2023XIAMEN KREYOLY OFFICE SUPPLIES CO.,LTD All Rights Reserved.